(English follows Japanese) 

九州大学 情報基盤研究開発センター 研究用計算機システムニュース   No.546
                                 2023.03.22

-----------------------------------------------------------------
 情報基盤研究開発センター研究用計算機システムWWWホームページ
        https://www.cc.kyushu-u.ac.jp/scp/
-----------------------------------------------------------------

   次期スーパーコンピュータシステム(2024年7月サービス開始予定)における
            ソフトウェアの利用について

                    情報統括本部 HPC事業室長 美添 一樹

2024年7月稼働を目指して調達手続きを進めている次期スーパーコンピュータシステム
において,現在ITOで運用中のソフトウェアMSC, SAS, ANSYS製品については,調査の
結果,利用者数が少ないことや利用範囲が地理的に制限されることから全国共同利用
サービスとしての継続が困難であるという結論に至りました.そのため,次期システ
ムにおいては,以下の通り運用を変更させていただく予定です.これらのソフトウェ
アをご利用の皆様には大変ご不便をおかけすることをお詫びいたします.

・MSC製品
 Marc/Mentat/Nastran/PatranなどのMSC製品に関する利用は,次期システム内でのみ
 の利用となります.MSC製品は,現有ITO内での利用者数が少なかった為、次期シス
 テムでは,ライセンス数を削減します.それに伴い,現有ITOシステムで可能だった
 外部PC等にインストールしたMSC製品からの利用はできなくなります.
 また、次期システムではリモートでのGUI起動は不可となります.

・SAS
 次期システムでは持ち込みライセンス形式での利用となります.SASライセンスは,
 全国共同利用サービスとして契約する場合に高額である一方で利用者数が少ないた
 め提供を行いません.ただし,利用者がご自分で購入されたSASライセンスを持ち込
 んで利用する形態を可能とする予定です.購入されたライセンスでのインストール
 をご希望の方は全国共同利用担当(request(at)iii.kyushu-u.ac.jp)までご連絡く
 ださい.

・ANSYS
 次期システムでは運用を継続いたしません.ANSYSのライセンスは,インストールし
 た計算機から20km以内の範囲でのみ許可されているものであるため,伊都キャンパ
 ス限定の利用となり,全国共同利用施設のサービスとしては適切でないためです.
 ご理解いただければ幸いです.

なお、現有スーパーコンピュータシステムITOにおけるMSC, SAS製品は,2024年2月末
まで利用可能です.




(This is translated using the AI translator DeepL) 

Kyushu University RIIT Supercomputer News  No.546 (2023.03.22)

-----------------------------------------------------------------
        RIIT Supercomputer System Web
        https://www.cc.kyushu-u.ac.jp/scp/
-----------------------------------------------------------------

Use of Software in the Next Generation Supercomputer System (Service Scheduled to Begin in July 2024)

                                  Kazuki Yoshizoe, General Manager, 
                       HPC Working Group, Information Infrastructure Initiative

In the next supercomputer system, which is currently under procurement procedures with the aim of starting operation in July 2024, we have concluded that the software MSC, SAS, and ANSYS products currently in operation at ITO cannot be continued as a nationwide shared use service due to the small number of users and geographical limitations on the scope of use. The survey concluded that it would be difficult to continue these products as a nationwide shared-use service due to the small number of users and geographical limitations on the scope of their use. Therefore, we plan to make the following changes to the operation of the next system. We apologize for any inconvenience this may cause to users of these software products.

MSC products
The use of MSC products such as Marc/Mentat/Nastran/Patran will be limited to the next system, and the number of licenses will be reduced in the next system due to the small number of users of MSC products in the current ITO. The number of licenses for MSC products will be reduced in the next system because the number of users of MSC products in the current ITO system has been small.
In addition, remote GUI launching will not be possible in the next system.

SAS
SAS licenses will be available in the form of a bring-your-own license in the next system, and will not be provided due to the low number of users, while SAS licenses are expensive when contracted as a nationwide shared use service. However, we plan to allow users to bring in their own SAS licenses that they have purchased. If you wish to install the software with the purchased license, please contact the Nationwide Collaborative Research Office (request(at)iii.kyushu-u.ac.jp).

ANSYS
ANSYS will not continue to operate in the next system because the ANSYS license only permits use within a 20-km radius of the installed computer, which is limited to the Ito Campus and not appropriate as a service of the National Joint-Use Facilities.
We appreciate your understanding.

Please note that MSC and SAS products in the current supercomputer system ITO can be used until the end of February 2024.